44
Panorama Mode
This feature allows you to capture a
panoramic view that will have significantly
more content than a single photograph.
Follow the arrow while keeping the
camera steady to seamlessly shoot an
ultra-wide scene of up to 360 degrees.
Follow the steps below:
1. Select the Panorama Mode (
) and
then press the
button to confirm.
2. Press the [
]/[ ]/[ ]/
[
] button to select a shooting
direction. (Should you not select
a direction, the default shooting
direction is “right”.) 2 seconds later, the
camera will be ready to take pictures.
You can also press the
button or
press the shutter button halfway down
to be ready to take pictures.
3. Compose your shot on the LCD and
half press the shutter button to focus
on the subject. After focusing, fully
press the shutter button down to
take the first picture. At this time, the
process dialog of panorama mode
stitching appears on the screen.
Save
Cancel
4. Pan the camera according to the set
direction. When the range of motion
does not exceed the range that the
camera can detect, the progress
bar behind the arrow partially turns
blue. When it completely turns blue,
panorama mode shooting is finished.
Panoramic image can be played
back by the method of flash playing.
Please see the animation panoramic
playback on page 73.
In Panorama Mode, the Flash, Self-
Timer, Macro Modes and Exposure
Compensation are not available.
Focus adjustment is also not available
at this time.
To Next Page
Loading...
