USING INTERCHANGEABLE ROKKOR LENSES OTHER THAN Me LENSES
When using Rokkor Lenses designed for the
Minolta SR.', SR·3 or SR-], which do not have
a meter coupling pin, you must use the
"stop-down measurement system" to set ex-
posure.
With this system the indicator needle moves
when the lens diaphragm is opened or closed
am:!
!h~
fQ!!QWl,!f
[circte-tippedl needle is ac-
tivated by the shutter-speed dial.
Auto Rokkor Lenses
1) Advance the film.
2) Pressthe diaphragm stop-down button
(it witt remain depressed).
3) Set the shutter speed.
4) Turn the diaphragm ring until the two
needles are aligned. (The diaphragm can be
set first.l
51
Press the diaphragm stop-down button
again.
61
Focus and shoot.
· The diaphragm stop-down button witt not
operate if the film advance lever has not been
advanced completely.
• When the diaphragm stop-down button is
pressed the second time, the diaphragm
reopens to maximum aperture.
• When the shutter is released, the diaphragm
1!"l!Qm!!!ic:!!l!r C:!Q~l;!~
c;!QWn
19 1hl;! Rr~Sl,!t
aperture and reopens.
To Next Page
Loading...
Need help?
General
