Your camera uses IX240 type film designed for use in Advanced Photo
System cameras.
• Your camera’s automatic transport system loads the film, sets the film
speed, and advances the film after each exposure.
• Use film from ISO25-3200. Your camera will automatically set the proper
ISO.
• After loading, the film chamber cannot be opened until the film has been
rewound.
• There is no need to worry about double exposure. DEP, Double Exposure
Prevention, prevents the camera from accepting exposed film.
16 17
CHECKING THE BATTERY
LOADING FILM
• If no display appears, replace the battery or check that it is inserted
correctly.
• Auto Power Off: The data panel will shut off and the lens will retract if the
camera is not operated for more than eight minutes. Press the shutter-
release button partway down, or press either zoom button to resume
operation.
• Do not obstruct the lens while it is retracting.
Continued on following page.
To Next Page
Loading...
