EasyManua.ls Logo

Minolta VECTIS 3000 - Taking Pictures in Full-Auto; Framing, Focusing, and Shutter Release

Minolta VECTIS 3000
45 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
24 25
FULL-AUTO OPERATION
5. When the green ready lamp glows, press
the shutter-release button all-the-way
down to take the picture.
If the ready lamp does not glow, the flash is not
charged. Wait until it glows, then take the
picture.
If the ready lamp blinks quickly and the shutter
is locked, your subject is too close (p. 29).
Press the shutter-release button with a slow
steady squeeze - never a quick jab.
3. Looking through the viewfinder, frame the
subject as desired.
Press the W zoom button to zoom out.
Press the T zoom button to zoom in.
Do not hold or obstruct the lens barrel.
4. Center your subject in the focus frame,
then press the shutter-release button
partway down.
If the close-framing guide appears in the
viewfinder, move the camera slightly upward
without lifting your finger (pp. 30-31).
Continued on following page.
After use, close the lens cover to turn the camera off.
If the lens is extended, follow the instruction on the next page to close the
lens cover.

Related product manuals