Minolta X-700 - Taking Pictures with Your X-700; Pre-shooting Checklist

REWINDING AND UNLOADING FILM
1. To rewind the film, remove the
camera's case if on, then press the
rewind release on the camera bot-
tom.
2. Unfold the rewind crank and
turn it in the direction of the arrow
until the red bar in the Safe Load
Signal moves out of the window to
the left. Near the end you will feel
tension on the film increase then
completely disappear, and the
crank will then turn freely.
CAUTION
• Never open the camera back
when there is any red still visible in
the Safe Load Signal.
3. When you are certain that the
exposed film is completely re-
wound into the cartridge, pull up
on the back-cover release knob to
open the back, then remove the
cartridge.
CAUTION
• Exposed film should be kept in a
cool, dry, dark place and developed
as soon as possible.
2 1