Minolta XG-A User Manual

ATTACHING AND REMOVING LENSES
To Attach
1. Remove the body cap from the camera lens
mount and the rear cap from the lens
bayonet, each' by turning the cap counter -
clockwise.
2. Align
the red mounting index on the lens
barrel with
the red index above the camera
lens
mount; insert the lens bayonet into the
mount ; and turn the lens clockwise until it
locks
into place with a click.
To Remove
While pushing the lens-release button, turn
the lens counterclockwise as far as it will go;
then lift the lens bayonet out of the mount.
CAUTION
If it becomes necessary to set the lens down
without a rear lens cap attached, be sure to set
the lens only on its front end (except for
fisheye lenses) as damage to the diaphragm
control pin could result from rear lens contact
with a hard surface.
11

Minolta XG-A Specifications

General

Brand	Minolta
Model	XG-A
Category	Digital Camera
Language	English