16
1.Slide the back-cover release
down to open the back cover.
• Before opening the back cover, look
through the film window to confirm that
film is not currently loaded.
LOADING THE FILM
• If the back cover does not open, turn the camera off and on to release the film-
chamber lock.
• Use only DX-coded 35mm film rated between ISO 25 and 3200.
• Do not use Polaroid instant 35mm film. Winding problems may result.
• ISO 400 film is recommended for best results.
• Always load and unload the film in subdued light.
To Next Page
Loading...
