22
FOCUS LOCK
Subjects outside the focus frame may not be in focus. Use focus lock to ensure
sharp pictures.
1.Place the focus frame on your subject.
2.Press and hold the shutter-release button
partway down; the indicator lamp should
glow to indicate focus lock.
• The indicator lamp confirms focus lock. If the lamp
does not glow, repeat steps 1 and 2.
3.Without lifting your finger, recompose the
picture. Press the shutter-release button all
the way down to take the picture.
• The focus lock is canceled when the shutter button is
released.
To Next Page
Loading...
Need help?
General
