EasyManua.ls Logo

MINOURA HYPERRIM - Note on High Speed Training

MINOURA HYPERRIM
12 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
- 10 -
With the Minoura magnetic resistance device, you may be able to reach to speeds in excess of 35 MPH
easily because your tire doesn’t contact with the ground, but only the rollers. This speed is not always
possible on the road or trail, but you can do it on this HyperRim trainer with the lowest resistance load
force and high gear ratio. We highly recommend you do not exceed 30 - 35 MPH as it will cause a
problem on the bearings and/or shaft, and greatly reduce the quality of your wirkout.
This magnetic resistance device is designed for usual training under 35 MPH (56 KPH) speed, so you
should keep your training speed under the limit.
If there is any grinding noise or excessive vibration from your magnetic resistance device during your
training, please contact your dealer or Minoura immediately.
NOTE ON HIGH SPEED TRAINING

Related product manuals