Why is the squeegee on my Minuteman Scrubber not drying well?
If the squeegee on your Minuteman Scrubber isn't drying properly, several factors could be at play. First, ensure the squeegee is clean. Next, verify that the vacuum motor is correctly positioned. Clean the entire aspiration unit. If the rubbers are worn, replace them. Also, check the alignment of the rubbers and clean or replace the squeegee wheels.
What to do if my Minuteman Scrubber does not clean well?
If your Minuteman Scrubber isn't cleaning well, start by checking the condition of the brush and replace it if the bristles are about 15 mm high. For exceptionally tough dirt, consider using special brushes designed for your specific needs.
How to fix insufficient water to the brushes of my Minuteman Scrubber?
If there's insufficient water reaching the brushes of your Minuteman Scrubber, first ensure the rate regulation valve is sufficiently open. Then, check that there is water in the solution tank. Finally, clean the electrovalve, unscrewing the magnet and putting it on after cleaning.
Read carefully the sections preceded by this symbol: they concern the safety of the operator, of the machine and of the environment.
Indicates danger of gas exhalations and emission of corrosive liquids.
Indicates fire danger; Do not approach with free flames.
Indicates the need for protection gloves.
Comprehensive list of safety rules for operating and maintaining the machine.
Steps to prepare the machine for operation before starting.
Troubleshooting steps for low water supply to brushes.
Checks and fixes for a squeegee not drying properly.
Reasons and solutions for the machine not cleaning effectively.
Troubleshooting steps for a non-operational vacuum motor.
Troubleshooting steps for a non-operational brush motor.
To Next Page
General
