Need help?Do you have a question about the Minuteman ER26 and is the answer not in the manual?
General| Power Source | Battery |
|---|---|
| Model | ER26 |
| Battery Voltage | 24 V |
| Type | Walk-behind |
| Brush Deck Size | 26 inches |
| Battery Type | Lead-acid |
| Brush Width | 26 inches |
Details daily and weekly maintenance tasks to be performed by the customer.
Outlines service center tasks required every 125 hours of operation.
Specifies service center tasks required every 250 hours of operation.
Describes safety checks and maintenance for every 500 hours of operation.
Instructions for entering service mode on SC280000 models.
Procedure for entering service mode on SCV2426P models.
Details brush pressure settings for the ER2832 model.
Specifies brush pressure settings for ER26 and SCV2426 models.
Brush pressure setting adjustments for ES2832, CP2832, and Phoenix 34.
Lists error codes and their descriptions for SC280000 models.
Explains LED error codes and their meanings for various models.
Instructions for adjusting side squeegees on disk decks.
How to adjust the rear squeegee assembly for ER26 and ER2832.
Adjusting caster clearance for proper squeegee operation.
Modifying squeegee caster height using washers.
Pitch adjustment for squeegees on SCV2426, SCV2832E models.
Components of the rear squeegee for SCV2426, SCV2832E.
Detailed steps for rear squeegee adjustment on SCV2426, SCV2832E.
Adjusting the brush actuator on specific models.
Procedure to enter service mode when the actuator is stuck.
Information on when to replace the electric brake disk.
Installation of protective caps and seals for electric brakes.
To Next Page
