Minuteman ER26 - 6. Side Squeegee Adjustment

6. Side Squeegee Adjustment
Cylindrical Decks
The side squeegees on the
cylindrical decks can be
adjusted by loosening the two
black knobs and moving the
squeegee assemble up or
down.
The brush assembly may be
accessed by removing the
yellow knob C. The squeegee
assembly is hinged at D.
Remove the three wing nuts
that mount the brush idler
bearing assembly E and
remove the brush roll.
Repeat the process on both
sides of the machines
B
E
ER26, ER2832, SCV2426 & SCV2832E Only
The side squeegees on the
cylindrical decks can be
adjusted by loosening the two
black knobs and moving the
squeegee assemble up or
down.
The brush assembly may be
accessed by removing the
yellow knob C. The squeegee
assembly is hinged at D.
Remove the three wing nuts
that mount the brush idler
bearing assembly E and
remove the brush roll.
Repeat the process on both
sides of the machines
A-Side Squeegee
B-Black Adjustment Knob
C-Yellow Brush Access Knob
D-Side Squeegee Hinge
E-Bush Access Plate
Page 27