3.2 Service Mode
The Service Mode Switch on
the ER26 and SCV2426 is
located next to the step on
the front of the machine on
the operator’s left side.
Once it is in service mode,
the deck can raised and
lowered by pressing the
upper or lower part of the
rocker switch.
SCV2426P Only
The Service Mode Switch on
the ER26 and SCV2426 is
located next to the step on
the front of the machine on
the operator’s left side.
Once it is in service mode,
the deck can raised and
lowered by pressing the
upper or lower part of the
rocker switch.
Page 12
To return the machine back to normal operation: Turn the key switch off
and back on. The machine will reset.