Mio Fuse - Device Setup and Operation; Activating & Charging; Setting Up Your Mio FUSE

Mio FUSE User Guide 05
in Mio GO when the Mio FUSE is connected to the app.
Each full charge will provide approximately 6-7 days of use, if heart rate monitoring is used for 1
hour per day.
For important battery care and battery safety information, please see Battery Care.
Setup
Initial set up of the Mio FUSE must be done through the Mio GO app. Download Mio GO onto
your smartphone from:
After Mio GO is installed, open the app and follow the set up instructions.
Set Up Profile
Setupyouruserprole.YourinformationwillallowMioGOtoprovidemoreaccuratedataand
a better interactive training experience.
Connect Mio Device
i) Turn on the Bluetooth function of your smartphone.
ii) Within Mio GO, select your Mio FUSE from the list of devices found. Once connected, the
time displayed on Mio FUSE will automatically sync with the clock on your smartphone.
iii) Tap
>
to customize your device. See Device Settings for more information about these
settings:
•
Choose your preferred heart rate training mode and set your heart rate zone limits
(See Heart Rate Zones for more information)
•
Customize Mio FUSE screens and display options
•
Set your daily goal
•
Select left/right arm position
•
Turn on/off vibration alert
Turn on/off Screen Lock featureYour Mio FUSE is now ready to use! For assistance in setting up
your device, please visit mioglobal.com/support.