Guide to Installation and Operation
2 | Densité 2 Housing Frame
1.3 Physical Layout
Front Panel Appearance
Note the openings in the panel (numbered 1 to 20) which allow the status LEDs on the installed cards to be
seen while the panel door is closed. The unnumbered opening near the center of the panel is for the controller
card status LED.
Rear Panel Appearance
The functionality of the ethernet connectors is described in the Controller manual.
The details of the rear connector panels will vary depending on the card type.
Status LEDs (Cards 11-20)
Power socket and cord retaining clip
Interface connectors (Controller card)
Power socket and cord retaining clip
To Next Page
Loading...