The RDS-32™ features a select key in the middle of the keypad
and surrounding navigation keys: up, down, left and right.
POWER ON by pressing the select key for two seconds.
POWER OFF by rst pressing the select key so that the
OFF selection is activated. Press the select key again and
hold for four seconds while the counter counts down.
If the select key is released before the countdown is complete
and the device powers o, the device will return to the menu display.
ENTER THE MENU by pressing the select key.
SCROLL IN THE MENU using the up and down arrow keys.
MOVE INTO A MENU SECTION by pressing the select
key or the right arrow key.
SET A VALUE, SELECT A FUNCTION, RESET A COUNTER
by pressing the select key.
RETURN TO A HIGHER LEVEL in the menu by pressing
the left arrow key or wait 15 seconds timeout to return to main display.
The navigation keys have direct functions in the main display:
Switch backlight on/o.
Mute/Unmute chirp and key buzzer. In warning condition,
acknowledges audio, vibration and LED signal.
DOSE
Check accumulated dose,
press again to check time to dose alarm.
...
User settable function key (with CSW-32 software). Not factory set.
To Next Page
Loading...
