Mirion Technologies RDS-32 - 1 INTRODUCTION; 1.1 RDS-32 SURVEY METER FAMILY AND VERSIONS; 2 GETTING STARTED; 2.1 METER OVERVIEW AND BASIC OPERATION

MENU ITEM FUNCTION
OFF Switch the meter o󰀨.
DOSE Check and reset the current accumulated dose.
MaxDR Check and reset the maximum recorded dose rate since last reset.
CHIRP
Adjust the sensitivity of the visual and audible pulse indication or
switch them ON/OFF.
ALARM
Check and change the dose rate and dose alarm levels and
choose alarm mode single, dual or o󰀨.
EXT.AL
Shown only if an external probe is connected. Check and change
the external probe alarm levels.
TM.2.AL
Shows the time left to reach the dose alarm in the current dose rate
eld.
DIAG
Activate the internal diagnostics, check rmware version and bat-
tery capacity.
COMM WRM connection settings, BLE settings.
HISTO
Make the histogram data collection settings or clear saved data.
Manual save of current readings.
SCALER
Set an integration time/count, acquire current background and start
net or gross acquisition over time.
PROBE
Shown only if an external probe is connected. Check and change
the conguration of the external probe.