Poor contrast LCD or no reception or
low batteries in sensors or receiver
Temperature, humidity, or air pressure
is incorrect.
Check/replace batteries. If multiple remote sensors are in use,
check location with corresponding “boxed numbers”. Or move
away from sources of heat/cold. Adjust relative air pressure to a
value from a reliable source (TV radio, etc.).
7. Specifications
Outdoor data
Transmission distance in open field : 100meter max.
Frequency : 433MHz
Temperature range : -40℃ to +65℃ (show OFL if outside range)
Resolution : 0.1℃
Measuring range rel. humidity : 1%～99%
Humidity accuracy : +/-5% under 0-45℃
Measuring interval thermo-hygro sensor : 48 sec
Water proof level : IPX3
Indoor data
Pressure / temperature : 48 sec
Indoor temperature range : 0℃ to +60℃
Resolution : 0.1℃
Measuring range rel. humidity : 1%～99%
Resolution : 1%
Measuring range air pressure : 919hPa – 1080hPa
Resolution/Accuracy : 0.1hPa/1.5hPa
Alarm duration : 120 sec
Power consumption
Base station : 3XAA 1.5V LR6 Alkaline batteries
Remote sensor : 2xAAA 1.5V LR03 Alkaline batteries
Battery life : Minimum 12 months for base station
Minimum 24months for remote sensor
To Previous Page
Loading...