Mistral MA02016KRY30 - Performance Parameters

5
• Use the timer effectively. Set the timer for the
desired operating time.
• Try to create a uniform circulation of room air.
Adjust air ow direction for even circulation of
room air.
• To ensure optimal efciency of the product,
keep doors and windows closed when it is
used as an air conditioner or dehumidier.
If the product is being used with the fan
function only, an open window could
improve air circulation.
NOTE: For optimum performance,
operate the unit under the usable
operating temperature and humidity
conditions indicated in this owner’s
manual. If the unit operates beyond
these conditions, it may cause
malfunctions of the unit or condensation
to drip from the unit.
Performance
Parameters
Model
MA02016KRY30
Power 220-240V
50Hz a.c.
Rated cooling capacity(W) 16000BTU
(4.68KW)
Rated input power(W) Cool 1750W
Refrigerant/Charge R32/580g
Air ow volume(m³/h) 500
Dehumidifying capacity (L/h) 1.375
Waterproof class IP20
Protection class Class I
Climate type T
Note: As a result of continual
improvements, the design and
specications of the product within may
differ slightly to the unit illustrated on the
packaging.
NOTICE:
1. The indicated noise parameter is measured in
laboratories before leaving factory.
2. The rated cooling capacity is tested under
the following conditions:
Cooling operation 35°C(DB) 24°C(WB)
3. We will not make formal notice for any
change in parameters, Please take the name
plate attached to the air conditioner as
major reference.
4. Operating temperature range:
Maximum
cooling
Minimum
cooling
DB/WB( °C ) 35/24 21/15
5 . Wiring diagram of the air conditioner is
attached on the unit.
6. If the supply cord is damaged, it must be
replaced by the manufacturer, its service
agent or similarly qualied persons in order to
avoid a hazard.