Mistral MA02016KRY30 - Dehumidifying Mode; Timer Mode; Sleeping Mode; Auto Restart Function

8
Operation Mode
Adjustment
Plug appliance in, the buzzer will make a “beep”
sound, and the appliance goes to Standby
mode.
Warning: Don’t place anything on top of
appliance as the Air Deector will turn up
automatically when the appliance turns on.
The foreign objects may fall into the appliance
and cause damage to the unit and/or injury to
the user.
ON/OFF:
Press the Power key to turn on the machine. The
Air Deector will turn up automatically to direct
the airow.
Press the Power key again to turn the machine to
Standby mode.
MODE:
After machine turns on, press this key to select
cooling, dehumidifying or fan mode.
SPEED:
After machine turns on, press this key to select
fan speed (high, mid and low).
DOWN:
In cooling mode, press this key to decrease
temperature setting between 31-16ºC in one
degree increments.
UP:
In cooling mode, press this key to increase
temperature setting between 31-16ºC in one
degree increments.
SLEEP:
In cooling mode, press this key to turn ON/OFF
sleeping function.
TIMER:
In cooling mode, when the Timer function is
selected, you can set the air conditioner to either
automatically turn OFF or turn ON after a delay
of up to 24 hours.
Dehumidifying mode
Dehumidifying mode is used to remove humidity
from the room without additional cooling. In this
mode, you do not need to use the exhaust hose,
but the water collected must be discharged
regularly.
• Press “MODE” to select dehumidifying mode,
“DRY” mode indicator turns on and “dh”
shows on display.
• In dehumidifying mode, sleep function
cannot be activated, and the fan speed is
pre-set at low and cannot be adjusted. Keep
doors and windows closed for best effect.
Timer mode
This feature allows you to set a delay from 1 to 24
hours that will turn the air conditioner ON or OFF
automatically.
• In standby mode, press “TIMER” to activate
the Auto start program, and then press
“UP”/”DOWN” keys to adjust the time setting.
Timer indicator turns on.
• In power-on mode, press “TIMER” to activate
the Auto stop program, and then press
“UP”/”DOWN” keys to adjust the time setting.
Timer indicator turns on.
• To deactivate the timer function, press Timer
key until Timer indicator turns off.
Sleeping mode
• Press “SLEEP” to enter into sleeping mode,
default setting of fan speed is low.
• When sleeping mode turns on, in cooling
mode, after the rst hour of operation, setting
temperature will rise by 1ºC, after the second
hour of operation, setting temperature will
go up another 1ºC, and then remain at that
temperature. This serves to ensure that room
does not get too cold during the night.
• Sleeping mode cannot be activated
together with either dehumidifying or fan
mode.
Auto restart
If there is a power failure during operation, the
unit will resume operation with the same setting
(except for Timer, sleep and swing) as before the
power failure. The timer, sleep and swing features
will be deactivated.