Mistral MPAC1600R - Turbo Mode and Usage Tips

10
Turbo
1.
2.
3.
4.
5.
6.
Tips for correct use
To get the best from your appliance, follow these recommendations:
•
•
•
•
•
•
•
•
Press the Function button and the Turbo icon will ash on display.
Press the Function button again to conrm and the Turbo icon starts.
This function set the appliance directly to Cool mode with setting temperature 18˚C and
High fan speed in order to reach low temperature in the shortest time.
This function can not be set in Heat mode.
To cancel this function, press the Function button, the Turbo icon
will ash on screen, and then press the Function button again to
conrm, the Turbo icon will stop ash and disappear from screen.
Press other button like Mode button or Increase or Decrease also can cancel this function.
Close the windows and doors in the room to be air conditioned (g. 21).When installing the
appliance semi-permanently, you should leave a door slightly open (as little as 1 cm) to
guarantee correct ventilation;
Protect the room from direct exposure to the sun by partially closing curtains and/or blinds
to make the appliance much more economical to run (g. 22);
Never rest objects of any kind on the appliance;
Do not block the air inlet or outlet of the appliance. Reduced air ow will result in poor
performance and could damage the unit (g. 23).
Make sure there are no heat sources in the room;
Never use the appliance in very damp rooms (laundries for example).
Never use the appliance outdoors.
Make sure the appliance is standing on a level surface. If necessary, place the castor locks
under the front wheels.
Fig. 21
close doors
and windows
Fig. 22
close curtains
Do not cover
the appliance.
Fig. 23