Mistral MPAC1600R - Remote Control Operation; Using the Remote Control; Remote Battery Management

11
Remote Control
How to use the Remote Control
•
•
•
•
Inserting or replacing the batteries
•
•
•
Note
•
•
•
•
Point the remote control at the receiver on the appliance.
The remote control must be no more than 7 meters away from the appliance (without
obstacles between the remote control and the receiver).
The remote control must be handled with extreme care. Do not drop it or expose it to direct
sunlight or sources of heat.
If the remote control do not work, please try to take out the battery, and put it back again.
Remove the cover on the rear of the remote control;
Insert two "AAA" 1.5V batteries in the correct position (see instructions inside the battery
compartment);
Put the cover back to the remote control.
If the remote control unit is replaced or disposed of, the batteries must be removed and
discarded in accordance with current legislation as they are harmful to the environment.
Do not mix old and new batteries. Do not mix alkaline, standard (carbon-zinc) or
rechargeable (nickel-cadmium) batteries.
Do not dispose of batteries in re. Batteries may explode or leak.
If the remote control is not be used for a certain length of time, remove the batteries.
Cooling Mode
Dry Mode
Fan Mode
Heating Mode
Smart Mode
Signal Sleep
Digital Display
Temperature
Fan Speed
Auto Speed
Child Lock
Timer On
Timer O
Turbo
Swing
Function Button
Power Button
Increase Button
Decrease Button
Timer Button
Unit Switch Button
Mode Button
Speed Button