Mistral MPAC1600R - Unit Installation and Placement; Window Slider Kit Assembly; Optimal Unit Placement; Powering On the Unit

5
45cm
45cm
45cm
Window Slider Kit Installation
Installation Parts
A.
B.
C.
How to assemble the window slider kit:
1.
2.
3.
Location to Install the Portable Air Conditioner
•
•
•
•
•
•
Power
•
•
Panel
Panel with one hole
Screw to lock window kit in place
Slide Panel B into Panel A and size to window width.
Windows sizes vary. With the width that your window
requires to ensure that there are no gaps or air pockets in
the window kit assembly after installation.
Lock the screw into the holes that correspond.
The appliance should be placed on a rm foundation to minimize noise and vibration. For
safe and secure positioning place the unit on a smooth, level oor strong enough to
support the appliance.
The appliance has casters to aid placement, but it should only be rolled on smooth, at
surfaces. Use caution when rolling on carpeted surfaces. Use caution and protect oors
when rolling over wood oors. Do not attempt to roll the appliance over objects.
The appliance must be placed within reach of a properly rated grounded socket.
Never place any obstacles around the air inlet or outlet of the appliance.
Allow at least 18”(45cm) of around and above space away from the wall for ecient
working.
The hose can be extended, but it is the best to keep the length to minimum required. Also
make sure that the hose does not have any sharp bends or sags.
Plug into the mains socket, then the appliance is standby.
Press the power button to make the appliance turn on. The last function active when it was
turned o will appear.