6
Cool Mode
Ideal for hot muggy weather when you need to cooling and dehumidify the room.
To set this mode correctly:
1.
2.
3.
4.
•
Heat Mode
•
•
Fan Mode
•
1.
2.
Dry Mode
Ideal to reduce room humidity (spring and autumn, damp rooms rainy periods, etc).
In dry mode, the appliance should be prepared in the same way as for cool mode, with the air
exhaust hose attached to enable the moisture to be discharged outside.
To set this mode correctly:
1.
•
Press the Mode button a number of times until the cool symbol appears.
Select the target temperature18˚C - 32˚C by pressing.
The increase or decrease button until the corresponding value is displayed.
Select the required fan speed by pressing the Speed button.
The most suitable temperature for the room during the summer varies from 24˚C - 27˚C. You
are recommended, however, not to set a temperature much below the outdoor
temperature. The fan speed dierence is more noticeable when the appliance is under FAN
mode but may not be noticeable under COOL mode.
“ * “ means only the heat pump model have this function.
If the appliance is cooling only model, when choose the heat mode,
appliance will turn to FAN mode.
When using the appliance in this mode, the air hose does not need to be attached.
Press the Mode button a number of times until Fan mode icon appears.
Select the required fan speed by pressing the Speed button:
High / Medium / Low
Press the Mode button a number of times until the Dry mode icon appears.
In this mode, fan speed is selected automatically by the appliance and
can not be set manually.
To Next Page
Loading...
