Mistral MSF1679R - Cleaning and Maintenance; General Maintenance; Cleaning Procedures

7
CLEANING AND MAINTENANCECLEANING AND MAINTENANCE
The stand fan requires minimal maintenance. Do not try to x it by yourself.
•
•
•
•
•
•
•
•
Cleaning
•
•
Before cleaning and assembling, do not plug the power cord into the socket.
To ensure that there is adequate air circulation to the motor keep vents at the rear of the
motor housing from dust, u, etc.
Do not be used a vacuum cleaner to clean these vents before unplug.
Do not dissaemble the fan to remove u.
Please wipe the exterior parts with a soft cloth which is soaked in mild detergent.
Do not use any abrasive detergent or solvents to which may scratch the surface.
Do not use any of followings as cleaning agent: gasoline, thinner, bending.
Do not allow water or any other liquid into motor housing or interior parts.
Be sure to unplug the fan from the electrical supply mains before cleaning.
Plastic parts should be cleaned with a soft cloth moisten with mild soap. Thoroughly
remove soap lm with dry cloth.