MiTAC N564 - Sleep mode; Airplane mode; Installing a memory card

5
Sleep mode
Your device will automatically switch off the screen after 1 minute (by default) of
inactivity. You can manually switch off the screen by pressing the Power button
briey.
To resume the screen, press the Power button briey and then unlock the device
by dragging the Lock icon (
) upwards.
To change the settings, tap
on the desktop

Settings

Display

Sleep.
Airplane mode
When you are in an airplane or in the area where data transferring is not allowed,
enable Airplane mode. You will be able to use many of your device’s applications
(such as playing games or listening music), but all wireless radios, including
wireless networks and Bluetooth, on the device are turned off – it cannot send or
receive data.
To enable Airplane mode: press and hold the Power button until the option window
displays. Then tap Airplane mode. The
icon in the status bar indicates that
Airplane mode is on.
To disable Airplane mode: tap
on the desktop

Settings

More in Wirelss
& networks, and tap the Airplane mode switch to turn it off.
Installing a memory card
CAUTION: Do not apply pressure to the center of the memory card.
Slide the cover latch to open the cover on the left side of the device to locate the
memory card slot. Noting the card orientation, hold the card (MicroSD) by the
edges and gently insert it into the slot.
To remove a card, rst unmount it from the device by tapping
on the desktop

Settings

Storage & USB. Locate the desired storage item and tap
. Wait