MITACA pod 1 plus - Filling the Water Tank

8
Fill the tank
•Remove the tank (8) by pulling it outward
and lifting. (Fig.1)
• Fill the tank with water (max. 1,5
litres). (Fig.2)
• Reinstall the tank by slightly tilting and
resting it on the water valve. (Fig.3)
Operating the coffee machine
8
8
8
Fig. 2
NOTE:
When the water run-out light
(A) illuminates, the tank is empty. Remove the tank (8) and fill it with
water.
Fig. 3
Fig. 1