EasyManua.ls Logo

MITACA pod 1 plus - Maintenance and Troubleshooting; Handling Malfunctions and Repairs; Correct Product Disposal; Installing Water Softening Filter

MITACA pod 1 plus
32 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
13
Appliances no longer in use should be returned free of charge to a point of sales to ensure that they
are disposed of properly. Appliances with a hazardous fault condition should be disposed of
immediately, making sure that they can no longer be used. Do not dispose of electrical appliances
as household waste (environment protection).
Disposal
In the event of malfunction, defects, or suspected failures after a fall, pull the plug out of the socket
and contact an authorised service centre. Never operate a defective machine.
Only authorised service centres can service or repair the appliance. The manufacturer disclaims
responsibility for any damage and/or injury that may result in the event of service that is carried
out in breach of the applicable safety regulations or is executed by unauthorised personnel.
Repair/maintenance
OPTIONAL WATER SOFTENING FILTER
• Fit the adapter into the tank as far as it will go (Fig.17)
• Fill the filter with water (Fig.18)
• Hook the filter into the adapter (Fig.19)
N.B.: replace the filter every 6 months
Fig. 19Fig. 18
Fig. 17

Related product manuals