Mitchell MIT6501 - Clear Stored Data (Log Clear)

-13-
(F) Clear/Erase the data stored (LOG Clear) ─ Function 4
1. Switch
⑪
the function rotary switch to turn on power and
no meter which function selected (Main page)
2. Press
⑥
SELECT button to enter the minor function
selection.
3. Press
⑦
(value-add) "up" or
⑧
(value-reduce) "down" to
nd the Erasing of data stored, LCD display the following
pictures respectively:
4. Press
⑨
(ENTER/SAVE) to inquire whether to clear up the
data or not; LCD displays the picture shown in below:
Note: if the erasing unit needs not to be done, press
⑩
(ESC) to skip it and return back to the minor function
selection.
5. Press
⑨
(ENTER/SAVE) again to clear up the data ; LCD
displays the picture shown in below:
, then return back to the minor function selection.
6. Press
⑩
(ESC) to return back to the main page.