1. Turn the switch to your record type, 33 or 45.
2. Put your Bluetooth speaker in pairing mode by making sure no other device is connected via
Bluetooth..
3. On the turntable, press and hold the (Bluetooth pairing) button for two seconds to turn the
Bluetooth transmitter on. White Bluetooth indicator light blinks slowly.
4. Wait for 5 seconds, press the Bluetooth button again to search for your Bluetooth speaker.
While searching, the Bluetooth indicator will flash quickly.
When connected successfully, the Bluetooth indicator lights solid.
5. To reset Bluetooth, press and hold the button for 10 seconds until the status indicator lights
turn off.
Listening to music through the Line out jacks
1. Plug the red and white connectors on the included RCA cable into the Line out jack on the
back of your turntable, red to red and white to white.
2. Plug the other end of the cable into your speakers, red to right speaker and white to left
speaker.
Note: Make sure that Bluetooth is off on any devices in the vicinity that will automatically
connect to your speaker.
Notes:
2. The effective distance between your Bluetooth device and your turntable is 33 ft.
(10m).
3. Make sure that you remove any obstacle between your Bluetooth speaker and your
turntable to make sure that the sound is clear.
To Next Page
Loading...