Mitcorp X2000 - Touch-Screen Key Functions - Wireless; Wireless Connection and Mobile Devices; Live Image Streaming via APP

- 18 -
•
3.2 Wireless function
•
3.2.1 Enable wireless
Touch
→
In a few seconds, the indicator shows up, then the system is ready to
be searched and connected by mobile devices.
•
3.2.2 Wi-Fi connection with mobile devices
Open your mobile Wi-Fi setting and search the system SSID. The SSID and
password can be found in the <MENU> / <info.>.
Connect the system with your mobile device.
Note:
-
-
Typically, the Wi-Fi system will be added to your favorite Wi-Fi
networklistafterrsttimeconnecting.ThefavoriteWi-Finetwork
will remember the SSID/password.
The main system allows 1 console to 1 mobile connection
simultaneously.
When use a new mobile device to connect the system, please check
there is not any existing mobile device enabling Wi-Fi and connect to
the system. It may cause the connecting step being rejected then fail.
•
3.2.3 Live share and access the image of the system.
Launch the “VideoscopeNow” APP.
When the system start streaming image to mobile APP, the wireless
indicator change will to blue color .
→