Mitek VAPR 3 - VAPR Handpiece and Cable

VAPR HANDPIECE AND CABLE
The VAPR Handpiece/Electrode (FIGURE 6) is ergonomically designed to facilitate
user comfort and control during use. The reusable Handpiece/Electrode and Cable
connects the disposable Electrode with the VAPR Generator.
The Handpiece and Cable are supplied Non-Sterile and must be sterilized prior to
each use. Sterilization instructions are provided in Section 6 of this manual.
Connector plug
Connector cable
handpiece
working tip
electrode shaft
electrode
connector
fIGURe 6
SYStem
deSCRIPtIoN
4-10