Mitek VAPR 3 - System Description

SYSTEM DESCRIPTION
The VAPR System is designed to provide soft tissue ablation (vaporization), contouring, cutting
and hemostasis of blood vessels during arthroscopic surgical procedures.
The components of the DePuy Mitek VAPR System (FIGURE 1) are individually described in
Section 4 of this manual:
• VAPR Generator
• VAPR Handpiece and Cable
• VAPR Electrodes
• VAPR, VAPR 3 Footswitch
• Power Cord (not provided)
Use only the DePuy Mitek Handpiece and Electrodes with this System.
fIGURe 1
INtRodUCtIoN
1-2
AC POWER INPUT
16 Character User
Display
Fault
Indicator
Control Panel
Connector Cable
Handpiece
Assembly
Electrode
VAPR Footswitch
On/Off
Switch
Generator
VAPR 3 FOOTSWITCH
Electrode with
Integrated Cable