Need help?Do you have a question about the Mitek VAPR 3 and is the answer not in the manual?
Alerts users to potential fire and explosion hazards associated with electrosurgical devices.
Outlines precautions for safe electrical connections and use of accessories with the VAPR Generator.
Lists essential safety checks and precautions to take before performing surgery with the VAPR System.
Details safety procedures and warnings for operating the VAPR System during surgical procedures.
Details the function of the VAPR Generator's power switch, fault indicator, mode button, and displays.
Describes the design and types of VAPR electrodes, including their internal classification codes and integrated return electrodes.
Provides step-by-step instructions for positioning and connecting the VAPR Generator.
Details the component requirements and initial setup steps for both VAPR II and VAPR 3 systems.
Provides instructions and warnings for safely removing and replacing electrodes during a surgical procedure.
Outlines the procedure for cleaning and preparing the VAPR Handpiece and Cable for sterilization.
Specifies the parameters for steam sterilization of the VAPR Handpiece and Cable.
Provides a guide to diagnosing and resolving common problems encountered with the VAPR system.
General| Brand | Mitek |
|---|---|
| Model | VAPR 3 |
| Category | Medical Equipment |
| Language | English |
To Next Page
