About this Guide
3
About this Guide
This guide provides instructions on using system features of the SX-200 ICP from SpectraLink
Netlink e340 and Netlink i640 Wireless Telephones. System features are the special functions
that your telephone can access in addition to making and receiving calls—features such as
transferring a call or setting up a conference. The system-independent features of the Netlink
telephones—volume adjustment, ringer mode, LCD status indicators, etc.—along with battery
charging instructions are described in other guides supplied by the manufacturer of the
telephones. See the following section for information on obtaining these guides.
Where to Find More Information
Additional guides produced by SpectraLink for the Netlink telephones are available on the Mitel
Documentation website at http://edocs.mitel.com/UG/Index.html. They include Quick
Reference Guides and User Guides for the telephones and battery charger units.
System Feature Activation
The features that have been programmed in your system may be viewed and activated through
the Shortcut Menu and Softkey Functions of the Netlink telephones.
To activate or deactivate a feature:
1. Press to go off-hook.
2. Press FCN. The first four fixed features (Trans/Conf, Cancel, Message, Redial) are listed
on the display.
3. Press FCN repeatedly to step through the displays of programmed features.
4. To activate or deactivate a feature, press the shortcut key of the desired feature. When a
feature is activated, a plus sign (+) appears in the display after the shortcut.
5. Press to exit the feature list.
Feature Access Codes
Use of some features requires dialing access codes. The codes are variable and may be
different than those in this guide. Ask your Administrator for a list of codes you should use.
Users Monitoring Emergency Calls
If your Netlink set has been programmed to receive emergency call notification (for example
"911" calls), you should be aware that the audible notification will be muted if any of the non-
call function keys (Supr, FCN, Line, Softkeys) are pressed. However, the emergency call visual
indication will continue until the call is acknowledged.
Note: You can also use the Up, Select, and Down buttons located on the left side of the
handset to scroll through the displays and activate the features on the list.
To Next Page
Loading...
Need help?
General
