Mitox 260B - Two-Stroke Fuel

260B Blower / 280BV Blower Vacuum
10
Original Instructions Version July 12
Two-Stroke Fuel
Fuel is very ammable. Do not smoke or bring any ame or sparks near fuel.
Always stop the engine and allow it to cool before refuelling.
Refueloutdoorsonbareground,restartengineatleast5mawayfromtherefuellingstop.
The engine is lubricated by oil mixed into petrol. Prepare a mixture of unleaded petrol and semi-synthetic
two-strokeoilthatmeetsthespecicationsof:APITC,ISO-L-EGC,JASOFC(LowSmoke)oil.
Recommended mixing ratio is 25:1.
FUEL WITH NO OIL (RAW PETROL) will cause severe damage to the engine which is not covered by
manufacturer’s warranty.
Usefresh,unleadedpetrol(95RON)andsemi-syntheticoilspeciallymadeforhighperformancetwo-stroke
engines.Mixinaratioof25partspetrolto1partofoil.
By using two-stroke oil specially made for two-stroke engines you will reduce the formation of ash and
carbondepositsonthesparkplug,piston,exhaustmuerandcylinderaswellasreducingemissionsof
harmful exhaust gases.
OilFOR4-CYCLEENGINESshouldnotbeusedastwo-strokelubricationoilasitcancausefoulingofthespark
plug, exhaust port blocking, piston ring sticking and other internal engine damage.