Mitox 260B - Stopping the Engine

260B Blower / 280BV Blower Vacuum
15
Original Instructions Version July 12
Hot Engine Starting Procedure
Set the ignition switch to the ON position .
Pull the starter rope until the engine starts.
Iftheenginedoesnotstartafter5pulls,usethecoldstartprocedure.
Overchoking
Should the engine become ooded due to overchoking, turn the ignition switch o, unscrew the spark plug,
wipe it dry or replace.
Stopping the Engine
Set the engine to idling by releasing the throttle lever.
Set the ignition switch to the o position OFF.
If the engine fails to stop, set the choke lever to the closed position to stall the engine; do not use the
machine until the ignition switch is repaired.