Mitox 360UX - Operation

360UX, 460UVX Premium Brushcutter
20
Original Instructions Version November 17
360UX/460UVX_1011171
Operation
Keep clear of the cutter head as it may start moving when the engine starts.
Starting the Engine
CAUTION do not pull the starter cord all the way out and do not let go of the starter handle when
the cord is extended, this can damage the starter mechanism.
The switch will automatically return to the 'On' position. Wait 10 seconds before attempting to
restart the engine to allow the switch to reset
Cold Engine Starting
Rest the unit on a flat, firm surface. Keep the cutting head o the ground and clear of surrounding
objects as it may start moving when starting the engine.
d). While holding the unit, pull out the
starter rope firmly until engine fires
(indicated by a ‘cough’ from the engine).
c). Choke: Set the choke lever in the
choke ( ) position (on front of
engine)
b). Primer bulb: Press the primer bulb
repeatedly until fuel begins to fill the bulb.
The bulb need not be completely filled.
a). Starting: Ignition Switch
automatically set in the ( I ) position.
(d)