CS450X / CS500X / CS560X PREMIUM
19
Original Instructions Version July 16
CS450X-CS500X-CS560X_190716
Checking the Oil Supply
fter starting the engine, run the chain at medium speed
and see if chain oil is sprayed as shown in the figure.
Care and Maintenance of Your Chainsaw
• In order to maintain your chainsaw in good working order, perform the maintenance and
checking operations described in this manual at regular intervals. In the event that any part
needs to be replaced, please contact the nearest authorised service dealer for assistance.
• lways turn o the engine before performing any maintenance or checking procedures.
• When sharpening, removing, or reattaching the blades, be sure to wear thick, sturdy gloves
and use only appropriate tools and equipment to prevent injury.
• When replacing blades or any other parts, be sure to use only genuine spare parts and
approved lubricants.
To Next Page
Loading...
