Mitox CS450X - Taking Care of Warning Labels; Explanation of Symbols on the Machine

CS450X / CS500X / CS560X PREMIUM
4
Original Instructions Version July 16
CS450X-CS500X-CS560X_190716
Directive 2000-14/CE. Guaranteed noise levels
Danger: Risk of intoxication
Danger: Risk of fire or explosion
Hot surface, risk of burn
Explanation of Symbols on the Machine
For safe operation and maintenance, symbols are carved in relief on the machine.
STOP
PULL
STOP
PULL
STOP
PULL
FUEL TANK
2 stroke mix
Position: Fuel cap
CHAIN OIL TANK
Position: oil cap
STOP SWITCH
Setting the switch to the “O” position, the engine stops immediately.
Position: Rear-left of the unit
Taking Care of Warning Labels
lways keep warning labels clean and free of scratches, which might make them illegible or
dicult to read. If the warning labels provided with your Chainsaw become damaged, peel
o, or otherwise become illegible or dicult to read, order new labels from the authorised
servicing dealer and replace the damaged labels. When applying new labels, first wipe away any
dirt and dry the surface before applying the new label in the same place as the original label.