EasyManuals Logo

Mitsubishi Electric 800 Series Quick Start Guide

Mitsubishi Electric 800 Series
2 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
三菱電機汎用インバー
FR-E846 専用保護カバー
2023年7月
<FR-E8PC>
INVERTER
FR-E846 dedicated protective cover
<FR-E8PC>
Specifications subject to change without notice
IB( )-0600987-A(2307)MEE
IB(NA)-0600987-A(2307)MEE
このたびは、三菱電機汎用インバータオプションユニットをご採用いただきありがとうございます。
この取扱説明書は、ご使用いただく場合の取扱い、留意点について述べてあります。誤った取扱いは思わぬ
不具合を引き起こしますので、ご使用前に必ずこの取扱説明書を一読され、正しくご使用いただきますよう
お願いいたします。
なお、この取扱説明書は、ご使用になるお客様の手元に届くようご配慮をお願いいたします。
本製品は FR-E846(IP67 仕様品)の主回路コネクタ部分に取り付けることで、通電時の主回路コネクタの挿
抜を防止するための保護カバーです。
3 取付け方法
モータ用主回路コネクタへの取り付け例を示します。
電源用主回路コネクタ、オプション用主回路コネクタいずれにも取り付けできます。
3 つのコネクタ全てに取り付ける場合は、本製品が 3 セット必要です。
1. ケーブルをコネクタに接続し、ケーブルとコネクタをロックします。
2. 取り付け穴に FR-E846 専用保護カバーを取付けねじで締め付けます。
(締付けトルク 1.65N・m)
Thank you for choosing this Mitsubishi Electric inverter option unit.
This document provides handling information and precautions for use of this product. Incorrect handling might
cause an unexpected fault. Before using this product, always read this document carefully to use this product
correctly.
Please forward this document to the end user.
This product is a protective cover to be installed to a main circuit connector of the FR-E846 inverter (IP67
model) to prevent insertion/removal of the connector during power-on.
3 Installation procedure
The following explains an example of installation to the main circuit connector for motor.
This product can also be installed to the main circuit connector for power supply and the main circuit
connector for option.
When installing this product to all of the three connectors, prepare three sets.
1. Connect a cable to a connector, then lock them.
2. Fit the holes on the FR-E846 dedicated protective cover to the mounting holes, then
tighten the mounting screws. (Tightening torque: 1.65 N·m)
1同 2 外形寸法図
同梱品の内容、数量を確認してください。
注意
本製品に強い力を加えないでください。破損することがあります。
同梱品 個数
FR-E846専用保護カバー(FR-E8PC) 1
取付けねじ(M4-8) 2
取扱説明書 1
(単位mm)
45
38
80
オプション用
主回路コネクタ
モータ用主回路
コネクタ
電源用主回路
コネクタ
保護カバー
取り付け穴
保護カバー
取り付け穴
保護カバー
取り付け穴
1 Enclosed items 2 Outline dimensions
Check the enclosed items and quantity of each
item.
CAUTION
Do not apply strong force to the product. Doing so may damage the product.
Enclosed items Quantity
FR-E846 dedicated protective
cover (FR-E8PC)
1
Mounting screw (M4-8) 2
Manual 1
(Unit: mm)
45
38
80
Main circuit
connector for option
Main circuit connector
for motor
Main circuit connector
for power suppl
Mounting holes
for protective cover
Mounting holes for
protective cover
Mounting holes for
protective cover

Other manuals for Mitsubishi Electric 800 Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Mitsubishi Electric 800 Series and is the answer not in the manual?

Mitsubishi Electric 800 Series Specifications

General IconGeneral
BrandMitsubishi Electric
Model800 Series
CategoryInverter
LanguageEnglish

Related product manuals