To Next PageTo Next PageWhat to do if my Mitsubishi Electric CITY MULTI PEFY-M140VMA-A1 Air Conditioner does not run?
If your Mitsubishi Electric Air Conditioner doesn't start, check the following: * **Power failure:** After power is restored, press the [ON/OFF] button. * **Power supply:** Ensure the power supply is turned ON. * **Fuse:** Replace the fuse if it's blown. * **Earth leakage breaker:** Reset the earth leakage breaker.
How to fix the sound of exhaust and rotation of the motor after Mitsubishi Electric CITY MULTI PEFY-M140VMA-A1 stops?
If you still hear the exhaust and motor running after your Mitsubishi Electric Air Conditioner stops: * **Drain-up mechanism:** When other indoor units are engaged in cooling operation, the machine stops after running a drain-up mechanism for 3 minutes when air-cooling operation is stopped. Wait for 3 minutes.
Why the sound of exhaust and rotation of the motor can be heard intermittently after stop of running Mitsubishi Electric CITY MULTI PEFY-M140VMA-A1?
If you intermittently hear the exhaust and motor running after your Mitsubishi Electric Air Conditioner stops, it is because when other indoor units are engaged in cooling operation, drained water is brought in, and the drain-up mechanism initiates a draining operation. It should stop soon. If the noise occurs more than 2-3 times in an hour, ask for repair service.
Why warm air comes out intermittently when the thermostat is OFF or during fan operation of Mitsubishi Electric Air Conditioner?
If warm air intermittently comes out when the thermostat is OFF or during fan operation of your Mitsubishi Electric Air Conditioner, it is because when other indoor units are engaged in heating operation, the control valves are opened and closed from time to time to maintain the stability of the system. It should stop soon. If the room temperature rises uncomfortably high in a small room, stop operation.
Why Mitsubishi Electric CITY MULTI PEFY-M140VMA-A1 Air Conditioner air flows out but it does not cool enough or heat enough?
If your Mitsubishi Electric Air Conditioner is blowing air, but not cooling or heating sufficiently: * **Temperature Adjustment:** Verify and adjust the set temperature, referring to section 3.3 "Set temperature". * **Filter:** Clean the filter if it's clogged with dust and dirt. * **Obstacles:** Remove any obstructions from the air inlet and outlet of both the indoor and outdoor units. * **Openings:** Ensure all windows and doors are closed.
Why Mitsubishi Electric CITY MULTI PEFY-M140VMA-A1 Air Conditioner runs briefly, but soon stops?
If your Mitsubishi Electric Air Conditioner starts but stops quickly: * **Obstacles:** Remove any obstacles from the air inlet and outlet of the indoor and outdoor units, then rerun the system. * **Filter:** Clean the filter if it's filled with dust and dirt, then rerun the system.
General| Series | CITY MULTI |
|---|---|
| Cooling Capacity | 14.0 kW |
| Heating Capacity | 16.0 kW |
| Power Supply | 220-240V, 50Hz |
| Refrigerant | R410A |
Details safety precautions related to the installation of the unit.
Instructions on how to turn the indoor unit on and off using the remote controller.
Guidance on selecting the appropriate location for unit installation.
Precautions and requirements for electrical work during installation.
