84 Chapter 7. Using IEEE 1394 Devices
The TV Remote Control and IEEE
1394 Devices
• For compatible satellite receivers and some cable
boxes, the TV remote control GUIDEkey displays the
on-screen programming guide for the receiver or cable
box. Press A Y 4 _" and ENTERto navigate the dis-
played program guide.
For satellite receivers, you may also be able to use the
numbers or other additional buttons.
For an IEEE 1394 cable box or satellite receiver, you
can also try using the CABLE/SATposition of the TV
remote control to see if it can operate the device. If
not, use the remote control that came with the device.
To Power On or Off a Compatible IEEE 1394
Device
1. Press INPUTto open the Input Selection menu.
2. Move the highlight to the icon for the device. There is
no need to press ENTER.
3. Press POWER.
4. Press EXITto return toTVviewing.
Operation of IEEE 1394 Devices with the TV's Remote Control
(slide switch set to TV position)
POWER
Power the device on/off when highlighted in the Input selection menu. See the instructions above.
MUTE
EXiT
CANCEL
GUIDE
Cancel function
when followed by ENTER)
Delete recording from Track List
Exit menus/displays
Cancel function or counter
reset
Mute On/Off
playback
Sktp Backwards 12seconds dunng
A V 4 _ Up/down/left/right playback " Up/down/left/right
Skip to end or beginning of program
Up/down in track list
PLAY Play Play
(_ REV Reverse picture scan or Slow Play ' Reverse or Slow Play
(_ FFWD Fast picture scan or Fast Play Fast Play
(_ PAUSE Pause Pause
To Next Page
Loading...
Need help?
General
