Mitsubishi Electric F940GOT-LWD-E User Manual (English)

Douglas KentAug 6, 2025

Why is sequence program transfer/monitoring disabled on my Mitsubishi Electric Touch terminals?

B
Brian BarrettAug 6, 2025
If sequence program transfer or monitoring is disabled on your Mitsubishi Electric Touch terminals, it might be because the PLC connection is set to "RS-232C", or the bar code reader or printer is set to valid. To resolve this, set the PLC connection to RS-422, or consider using a model with two built-in RS-232C ports, such as the F943GOT-SBD-H. Alternatively, if the bar code reader or printer settings are the issue, change them in the screen creation software.

Mitsubishi Electric F940GOT-LWD-E Specifications

General

Display Type	TFT LCD
Power Supply	24 VDC
Number of Colors	256 colors
Backlight	LED
Resolution	320 x 240 pixels
Touchscreen Type	Analog resistive
Communication Ports	RS-232
Operating Temperature	0 to 50 °C
Storage Temperature	-20 to 60 degree C
Humidity	10 to 90% (non-condensing)
Vibration Resistance	10 to 57 Hz, 0.075 mm
Shock Resistance	147 m/s² (15G), 3 times in X, Y, and Z directions
Protection Rating	IP65 (front panel)
Display Size	5.7 inch

Mitsubishi Electric F940GOT-LWD-E User Manual