Why does my Mitsubishi Electric Monitor work after reconnecting the cable?
If your Mitsubishi Electric Monitor works after reconnecting the cable, the cable connection may be faulty. Ensure that you securely connect the cable.
What to do if Mitsubishi Electric GOT2000 Touch terminals are not restored when pressing the GOT reset switch?
If your Mitsubishi Electric Touch terminal is not restored when pressing the reset switch, it might be due to a temporary malfunction caused by noise. In this case, take corrective action using the GOT installation status check sheet.
How to improve wiring on Mitsubishi Electric GOT2000 Touch terminals?
To improve the wiring of your Mitsubishi Electric Touch terminals due to noise, take corrective action for wiring using the GOT installation status check sheet.
Why should Mitsubishi Electric Touch terminals power be supplied separately?
By separately wiring the Mitsubishi Electric Touch terminals power and the I/O equipment power/power equipment power, and connecting an isolation transformer, the influence of noise is reduced.
What to do when Mitsubishi Electric Touch terminals do not operate?
If the GOT does not operate or malfunctions, identify the cause of the malfunction using the GOT status check sheet, and take a corrective action.
What to do if Mitsubishi Electric Touch terminals require a corrective action not listed?
If a corrective action other than the above is required for your Mitsubishi Electric Touch terminals, fill out the system configuration check sheet with details about your system, and consult your local Mitsubishi Electric System & Service Co., Ltd.
What to do if a corrective action other than the above is required for Mitsubishi Electric Monitor?
Fill out the system configuration check sheet with details about your system, and consult your local Mitsubishi Electric System & Service Co., Ltd.
What to do if Mitsubishi Electric Monitor is not restored after pressing the reset switch?
If your Mitsubishi Electric Monitor is not restored after pressing the reset switch, it may be due to a temporary malfunction or noise. Take corrective action using the GOT installation status check sheet 10.1.2.
What to do if Mitsubishi Electric Monitor is not restored after power on/off?
If your Mitsubishi Electric Monitor is not restored after power cycling, check if the power is properly supplied to the device.
How to fix a completely black screen on a Mitsubishi Electric Monitor?
If the screen of your Mitsubishi Electric Monitor is completely black, it could be due to a faulty LCD or basic software. Try the following steps in order: first, rewrite the package data. If the issue persists, reinstall the basic software.
Precautions related to the design and potential failures of the GOT.
Precautions for safely installing and mounting the GOT unit and its components.
Precautions for safe and correct electrical wiring of the GOT and its components.
Precautions for safe startup, cleaning, and maintenance of the GOT unit.
Describes the methods for executing utility functions, including installing BootOS and package data.
Configuration of display settings such as screen time, saving time, brightness, and power LED.
Setting and configuring IP addresses, subnet masks, and default gateways for Ethernet communication.
Authenticating security levels set by objects or screen switches using a password.
Setting the authorization guarantee time for the VNC server function.
Setting storage locations for backup data and configuring backup/restoration parameters.
Enabling/disabling wireless LAN, setting access points, and checking connection status.
Collecting and displaying system status data for self-check and diagnostics.
Correcting touch panel reading errors by adjusting the touched position to the object position.
Displaying error codes and messages when errors occur in the GOT or related components.
Checking communication between GOT and PLC, and verifying connection interfaces and cables.
Overview of monitor screens designed to confirm PLC CPU device status and aid troubleshooting.
Details the necessary BootOS and system applications required for GOT utility execution.
Explains the two main methods for installing BootOS and system applications using data storage.
Provides a comprehensive list of GOT error codes, network error codes, and their corrective actions.
Describes and allows configuration of GOT Ethernet settings including IP address and port numbers.
Corrects touch panel reading errors by adjusting the position of touched points.
Manages operator information, including adding, editing, deleting, importing, and exporting.
Executing backups, restorations, and deletion of backup data for controller settings.
General| Display Type | TFT Color LCD |
|---|---|
| Power Supply | 24VDC |
| Compatible Software | GT Works3 |
| Series | GOT2000 |
| Type | Graphic Operation Terminal |
| Display Size | 8.4-inch, 10.4-inch, 12.1-inch, 15-inch |
| Screen Sizes | 8.4-inch, 10.4-inch, 12.1-inch, 15-inch |
| Resolution | Varies by model (e.g., 800×600, 1024×768) |
| Touch Panel | Analog resistive film |
| CPU | RISC CPU |
| Communication Ports | Ethernet, USB, Serial (RS232, RS422/485) |
| Operating Temperature | 0°C to 50°C |
| Protection Rating | IP67 (front panel) |
To Next Page
