To Next PageTo Next PageWhat causes regenerative overvoltage trip during constant speed on Mitsubishi Electric FR-D720-0.4K?
If regenerative energy causes the inverter's internal main circuit DC voltage to reach or exceed the specified value, the protective circuit is activated to stop the inverter output. Ensure that you keep load stable.
How to reset Mitsubishi Electric Inverter?
Turn OFF the reset command.
What to do if Mitsubishi Electric FR-D720-0.4K shows heatsink overheat?
If the heatsink overheats, the temperature sensor is actuated and the inverter output is shut off. Set the surrounding air temperature to within the specified limits.
What causes write disable error on Mitsubishi Electric FR-D720-0.4K?
A write disable error can occur if you attempt to make parameter settings when Pr. 77 Parameter write selection has been set to disable parameter write, if the frequency jump setting range overlapped, or if the PU and inverter cannot make normal communication. Check the setting of Pr. 77 Parameter write selection, the settings of Pr. 31 to Pr. 36 (frequency jump), and the connection of the PU and inverter.
What does mode designation error mean on Mitsubishi Electric Inverter?
A mode designation error appears if a parameter setting is attempted in the External or NET operation mode with Pr. 77 not set to "2", or if a parameter setting is attempted when the command source is not at the operation panel. Set the operation mode to the "PU operation mode" or disconnect the parameter unit (FR-PU04/FR-PU07) to make parameter settings.
How to fix write error during operation on Mitsubishi Electric FR-D720-0.4K?
A write error during operation can occur when parameter write was performed during operation with a value other than "2" set in Pr. 77 and the STF (STR) is ON, or if the inverter is operating. Set "2" in Pr. 77 or stop the inverter before making parameter settings.
What causes stall prevention stop on Mitsubishi Electric FR-D720-0.4K?
If the output frequency has fallen to 1Hz by stall prevention operation and remains for 3s, a fault appears and the inverter output is shut off. Reduce the load weight to prevent this.
What to do when Mitsubishi Electric FR-D720-0.4K Inverter shows input phase loss?
If function valid setting (=1) is selected in Pr. 872 Input phase loss protection selection and one phase of the three phase power input is lost, the inverter output is shut off. Ensure that the cables are wired properly.
How to resolve analog input fault on Mitsubishi Electric FR-D720-0.4K Inverter?
An analog input fault appears if voltage(current) is input to terminal 4 when the setting in Pr.267 Terminal 4 input selection and the setting of voltage/current input switch are different. Give a frequency command by current input or set Pr. 267 Terminal 4 input selection, and voltage/current input switch to voltage input.
What happens when Mitsubishi Electric FR-D720-0.4K Inverter has output phase loss?
If one of the three phases (U, V, W) on the inverter's output side (load side) is lost during inverter operation, the inverter stops the output. Ensure that the cables are wired properly.
General| Model | FR-D720-0.4K |
|---|---|
| Series | FR-D700 |
| Rated Output Capacity (kVA) | 0.8 |
| Output Rated Current (A) | 2.5 |
| Input Voltage | 200-240VAC |
| Input Phase | 3-phase |
| Horsepower | 0.5 HP |
| kW | 0.4 kW |
| Input Frequency | 50/60Hz |
| Cooling Method | Fan cooled |
| Humidity | 90% RH or less (non-condensing) |
| Output Voltage | 3-phase 200-240V AC |
| Output Frequency | 0.2 to 400 Hz |
| Control Method | V/F control, vector control |
| Frequency Range | 0.2 to 400 Hz |
| Protection Features | Overcurrent, Overvoltage, Short Circuit |
| Operating Temperature | -10°C to +50°C |
| Storage Temperature | -20°C to +65°C |
| Altitude | 1000m or less |
Verifies the inverter model and accessories against the order and ensures the product is intact.
Details the various peripheral devices that can be connected to the inverter for expanded functionality.
Provides instructions for safely removing and reinstalling the front and wiring covers for access.
Covers environmental requirements and design considerations for inverter installation enclosures.
Explains the terminal connection diagrams for main and control circuits, including options.
Details the specifications for main circuit terminals, including power input and motor wiring.
Defines specifications for control circuit terminals, including input, output, and communication signals.
Guides the connection of optional units like brake resistors, brake units, and reactors.
Addresses measures to reduce electromagnetic noise and handle leakage currents to prevent malfunctions.
Explains the necessity and procedure for installing reactors to prevent issues caused by power input circuits.
Recommends using magnetic contactors on the inverter's input side for safety and maintenance purposes.
Details measures for driving 400V class motors to prevent insulation deterioration due to surge voltages.
Provides essential guidelines to prevent product damage or shortened lifespan from incorrect handling.
Explains system configurations and interlocks to prevent accidents even if the inverter fails.
Describes the names and functions of the operation panel components for controlling the inverter.
Lists all available parameters, their settings, initial values, and related pages for reference.
Details how to adjust torque boost and other parameters to optimize motor performance.
Explains how to set maximum/minimum frequencies and avoid mechanical resonance points.
Describes setting base frequency, voltage, and load patterns for optimal V/F characteristics.
Covers multi-speed operation, jog operation, and remote setting functions using external terminals.
Details how to set acceleration, deceleration times, and patterns for smooth motor control.
Covers motor overheat protection and selection of appropriate motors for optimal performance.
Explains DC injection braking, regenerative braking, and various stop selection methods.
Details how to assign functions to input and output terminals for various control signals.
Describes how to select and display various operating status and monitor signals.
Covers automatic restart and power-failure deceleration stop functions for system continuity.
Explains retry functions and phase loss protection for managing fault conditions.
Details optimum excitation control to improve motor efficiency and achieve energy savings.
Provides techniques for reducing motor noise, EMI, and avoiding mechanical resonance.
Explains how to use analog signals for frequency setting, including bias and gain adjustment.
Covers functions like PU stop, parameter write disable, and password protection.
Details how to select operation modes (PU, External, Network) and control sources.
Explains PU connector wiring, RS-485 communication, and Modbus-RTU specifications.
Covers advanced functions like PID control, dancer control, and regeneration avoidance.
Describes functions such as cooling fan control, part life display, and maintenance timer alarm.
Details operations for setting parameters, changing display language, and adjusting panel contrast.
Explains how to connect and configure the FR-E500 series operation panel.
Provides instructions for clearing parameters to their initial values or clearing all parameters.
Allows viewing and setting parameters that have been changed from their initial values.
Explains how to check and clear the inverter's fault history records for diagnostics.
Describes the procedures for resetting protective functions after a fault occurs.
Provides a comprehensive list of fault and alarm codes displayed by the inverter.
Details common causes for error messages, warnings, and faults with their respective corrective actions.
Lists the mappings between digital codes and actual alphanumeric characters shown on the operation panel.
Offers initial checks and troubleshooting steps for common motor and machine issues.
Covers daily and periodic inspection procedures to prevent faults and ensure reliable operation.
Details how to measure main circuit electrical parameters using various instruments.
Presents the electrical ratings and specifications for different inverter models and power supplies.
Lists general specifications including control methods, frequency range, and input/output signals.
Provides detailed mechanical dimensions and panel cutouts for various inverter models.
