To Next PageTo Next Page
Need help?Do you have a question about the Mitsubishi Electric FR-E500 and is the answer not in the manual?
General| Series | FR-E500 |
|---|---|
| Input Frequency | 50/60 Hz |
| Output Voltage | 3-phase 200 to 240 V AC |
| Output Frequency | 0.2 to 400 Hz |
| Power Rating | Varies by model within the power range |
| Control Method | V/F control |
| Protection | Overcurrent, Overvoltage, Undervoltage, Overheat, Short circuit |
| Protection Class | IP20 |
| Braking Unit | Built-in |
| Ambient Temperature | -10°C to +50°C |
| Operating Temperature | -10°C to +50°C |
| Storage Temperature | -20°C to +65°C |
| Humidity | 95% RH or less (non-condensing) |
| Altitude | 1000m or below |
| Vibration | 5.9 m/s² |
| Cooling Method | Forced air cooling |
| Weight | Varies by model |
Essential information before starting inverter operation and product checks.
Details on required peripheral devices and their basic configuration for inverter operation.
Overview of the inverter's external appearance, internal components, and assembly.
Instructions for proper inverter installation, including environmental and clearance considerations.
Detailed guidance on connecting main circuit and control circuit terminals for the inverter.
Information on managing power supply harmonics, noise, and leakage currents.
Guidance on inverter operation modes and necessary preparations before use.
Explanation of the names, functions, and operation of the control panel (FR-PA02-02).
Procedures for pre-operation checks and detailed steps for various operation modes.
A comprehensive list of all inverter parameters, their ranges, and factory settings.
In-depth explanations of individual parameters and their functions for inverter configuration.
Guidance on identifying and resolving common issues like motor not starting or rotating incorrectly.
Recommended procedures and checks for maintaining the inverter's performance and longevity.
Definitions and corrective actions for various error codes displayed by the inverter.
Technical details and ratings for 3-phase 200V, 400V, and single-phase 100V power supplies.
