Mitsubishi Electric FR-F 700 EC User Manual

264 pages

To Next Page

INSTRUCTION MANUAL (Applied)

INVERTER

INVERTER FR-F700 INSTRUCTION MANUAL (Applied)

IB-0600193ENG-A (0405)MEE Printed in Japan Specifications subject to change without notice.

HEAD OFFICE:MITSUBISHI DENKI BLDG MARUNOUCHI TOKYO 100-8310

WIRING

PRECAUTIONS FOR USE

OF THE INVERTER

PARAMETERS

PROTECTIVE FUNCTIONS

SPECIFICATIONS

FR-F740-00023 to 02160-EC

Questions and Answers:

K
kennethgarciaSep 1, 2025
What does E.THT Major fault mean on Mitsubishi Electric DC Drives?
- A
  awhiteSep 1, 2025
  The E.THT major fault on your Mitsubishi Electric DC Drive indicates an inverter overload shut-off, which is triggered by the electronic thermal relay function.
C
Christopher WhiteAug 30, 2025
What does E.OV3 Major fault mean on Mitsubishi Electric DC Drives?
- R
  richardhollandAug 30, 2025
  The E.OV3 major fault on your Mitsubishi Electric DC Drive indicates a regenerative overvoltage shut-off occurred during deceleration or stop.
S
swansonbrianAug 29, 2025
What does E.OV2 Major fault mean on Mitsubishi Electric FR-F 700 EC?
- J
  Jennifer ThompsonAug 29, 2025
  The E.OV2 major fault on your Mitsubishi Electric DC Drive indicates a regenerative overvoltage shut-off occurred during constant speed.
W
William FlemingAug 27, 2025
What does E.OV1 Major fault mean on Mitsubishi Electric FR-F 700 EC?
- C
  Christine ChaneyAug 28, 2025
  The E.OV1 major fault on your Mitsubishi Electric DC Drive indicates a regenerative overvoltage shut-off occurred during acceleration.
N
nicholas82Aug 26, 2025
What does E.OC3 Major fault mean on Mitsubishi Electric FR-F 700 EC?
- B
  brianbergerAug 26, 2025
  The E.OC3 major fault on your Mitsubishi Electric DC Drive indicates an overcurrent shut-off occurred during deceleration or stop.
T
Troy DanielsAug 25, 2025
What does E.OC2 Major fault mean on Mitsubishi Electric FR-F 700 EC?
- S
  Sarah SimsAug 25, 2025
  The E.OC2 major fault on your Mitsubishi Electric DC Drive indicates an overcurrent shut-off occurred during constant speed.
R
Ricardo KnoxAug 23, 2025
What does E.OC1 Major fault mean on Mitsubishi Electric FR-F 700 EC DC Drives?
- A
  Amanda BrandtAug 23, 2025
  The E.OC1 major fault on your Mitsubishi Electric DC Drive indicates an overcurrent shut-off occurred during acceleration.

Mitsubishi Electric FR-F 700 EC Specifications

General

Category	DC Drives
Cooling Method	Forced air cooling
Type	Inverter
Output Frequency	400 Hz
Horsepower Range	0.5 HP
Control Method	V/F control
Rated Output Current	Varies by model (refer to specific model datasheet)
Overload Capacity	150% for 60 seconds, 200% for 3 seconds
Braking Unit	Built-in
Communication	RS-485
Ambient Temperature	-10°C to +50°C (14 to 122°F)
Storage Temperature	-20°C to +65°C (-4°F to 149°F)
Humidity	95% or less (non-condensing)
Altitude	Up to 1000m (3300ft) above sea level
Protection	Overcurrent, Overvoltage, Undervoltage, Overheating, Short Circuit
Protection Level	IP20