To Next PageTo Next Page
Need help?Do you have a question about the Mitsubishi Electric FX3G-232-BD and is the answer not in the manual?
General| Category | Controller |
|---|---|
| Model | FX3G-232-BD |
| Manufacturer | Mitsubishi Electric |
| Type | Communication Module |
| Communication Interface | RS-232 |
| Communication Standard | RS-232C |
| Compatible Series | FX3G |
| Number of Channels | 1 |
| Max Baud Rate | 115200 bps |
| Current Consumption | 50 mA |
| Applicable PLC | FX3G PLC |
| Function | Serial Communication |
| Power Supply | 5V DC (from PLC) |
| Weight | 0.1 kg |
Explains communication types supported by serial ports and network connectors, including applicable equipment.
Provides a map detailing the applicability of communication equipment for different FX Series PLCs.
Explains how to set communication parameters for the FX Series, covering various methods and correspondences.
Covers troubleshooting common issues with Parallel Link, including PLC version, communication status, installation, and sequence programs.
Explains system configuration and equipment selection for Computer Link using RS-485 or RS-232C.
Explains communication port and applicable parameters for various inverter series.
Explains communication ports and applicable parameters for various inverter series.
Details communication setting parameters for S500 Series inverters connected via RS-485 port.
Details communication setting parameters for E500 Series inverters connected via PU port.
Details communication setting parameters for V500, F500, A500 Series inverters connected via PU port.
Details communication setting parameters for V500, F500, A500 Series inverters connected via FR-A5NR.
Details communication setting parameters for E700, D700 Series inverters connected via PU port and FR-E7TR.
Details communication setting parameters for F700 and A700 Series inverters with built-in RS-485 terminal.
Details communication setting parameters for F800 and A800 Series inverters with built-in RS-485 terminal.
Explains communication setting methods for inverter communication in FX PLCs.
Explains communication setting methods for non-protocol communication using parameters or sequence programs.
Covers troubleshooting common issues with non-protocol communication, including PLC version, communication status, installation, and sequence programs.
Lists applicable FX PLCs and communication equipment combinations for FX2N-232IF.
Explains communication setting and initialization for programming communication in FX PLCs.
Covers troubleshooting common issues with programming communication, including PLC version, tool applicability, communication status, installation, and sequence programs.
Lists applicable PLC models for remote maintenance and notes products whose production was stopped.
Explains system configuration and equipment selection for remote maintenance using RS-232C.
Outlines the system configuration required for remote maintenance, including connection diagrams.
Details wiring procedures for remote maintenance.
