Need help?Do you have a question about the Mitsubishi Electric MELSEC-F FX-USB-AW and is the answer not in the manual?
General| Compatible Series | MELSEC-F FX Series |
|---|---|
| Interface | USB 1.1 |
| Connector A | USB Type A |
| Connector B | Mini-DIN 8-pin |
| Operating Temperature | 0 to 55°C |
| Power Supply | Bus-powered |
| Compatible Operating Systems | Windows XP/Vista/7/8/10 |
| Driver Installation | Required (included) |
Introduction to the manual and its purpose for the USB driver installation.
General safety guidelines and recommendations for using the product.
Information on trademarks and registered names mentioned in the manual.
Precautions for starting up and maintaining the PLC and associated equipment.
Guidelines for environmentally safe disposal of the electronic device.
Precautions for handling the product during transport and storage.
Overview of the USB driver software for FX-USB-AW and FX3U-USB-BD.
Details hardware and USB cable specifications for the FX-USB-AW/FX3U-USB-BD.
Lists the OS and software requirements for installing the USB driver.
Describes the system configuration for FX-USB-AW and FX3U-USB-BD.
Step-by-step instructions for connecting the FX-USB-AW and FX3U-USB-BD to the PLC.
Instructions for installing the driver from software files on a computer.
Instructions for installing the driver using the provided CD-ROM.
Detailed steps for installing the driver on various Windows OS versions.
Procedure to uninstall the driver on older Windows operating systems.
Procedure to uninstall the driver on Windows Vista.
Procedure to uninstall the driver on Windows 7.
Procedure to uninstall the driver on Windows 8 and 8.1.
Procedure to uninstall the driver on Windows 10.
Troubleshooting steps for communication issues with FX-USB-AW.
Troubleshooting steps for communication issues with FX3U-USB-BD.
To Next Page